3
PRIMUSBUSINESS.CA
PRIMUS BUSINESS SERVICES
|
HOSTED PBX
|
PANASONIC TGP550/TPA50 QUICK SETUP GUIDE
Status Light Indicators
STATUS Indicator
Solid Green
The base unit is connected to the Internet and connected to
the HPBX Small Office system.
Flashing Green
The base unit is downloading data. Do not disconnect the
Ethernet cable or AC power adaptor from the base unit until
the light becomes solid green.
Solid Red
The base unit is booting up.
Flashing Red
The base unit is registering a handset.
Solid Yellow
The base unit’s IP address may conflict with another IP
address on your network.
Flashing Yellow
(slow)
The base unit is attempting to connect to the Internet or to
the HPBX Small Office system. If it flashes indefinitely,
check your network settings, ensure your Internet
connection is working, or try restarting all your devices.
Flashing Yellow
(fast)
The device may be defective. Unplug and reconnect the AC
power adapter to reset the unit. If it flashes indefinitely,
contact Primus Technical Support.
Off
The base unit is off and not powered, or the Ethernet cable
is not connected properly, or it is not getting an active
network connection. Ensure your Internet connection and
network devices are turned on.
Setting up the Cordless Handset
1.
Plug the AC adapter into the charger. Press the plug firmly to make sure it is
in place. There are hooks at the bottom of the unit to secure the cable in
place to prevent it from being accidentally pulled out. Plug the AC adapter
into an electrical outlet.
