Preparation
10
For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (
A
) and telephone
line jack (
B
). Connect the AC adaptor cord
by pressing the plug firmly (
C
).
L
Use only the included Panasonic AC
adaptor PQLV19 or PQLV255.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a Panasonic T-adaptor (page
6). Emergency power can be supplied to
the unit by connecting a Panasonic
battery back-up power supply noted on
page 6.
To single-line
telephone jack
(RJ11C)
(120 V AC,
60 Hz)
Hook
C
A
B
TG2620_2621_2622.book Page 10 Monday, December 26, 2005 1:48 PM
