24
8.19. Remove the C3-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the Stand bracket L.
(See section 8.16.)
3. Remove the flexible cables holder fastening screws (
×
10
).
4. Disconnect the flexible cables (CB11, CB12, CB13, CB14
and CB15).
5. Disconnect the flexible cable (C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (
×
5
) and remove the C3-Board.
8.20. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the cabinet assy and the plasma panel fastening
screws (
×
9 ).
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
8.21. Remove the Glass holders
1. Remove the Cabinet assy. (See section 8.20.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (
×
2 ,
×
2 ).
4. Remove the Joint metal top (
×
2) and the Joint metal bot-
tom (
×
2).
Summary of Contents for TC-58PS14
