Panasonic TC-32LX70 - 32" LCD TV, Operating Instructions Manual

Page: 47 / 110

47
FAQs, etc.
Frequently
Asked Questions
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Problem Actions
Screen
Sound
Other
Chaotic image, noisy
•
Check nearby electrical products
(car, motorcycle, fluorescent lamp).
No image can be
displayed
•
Check Picture menu (p. 22)
Only spots are displayed
instead of images
•
Check the channel settings. (p. 30)
•
Check the antenna cables.
Neither image nor
sound is produced
•
Is the power cord plugged into the outlet?
•
Is the TV unit turned On?
•
Check Picture menu (p. 22) and volume.
•
Are the remote control codes correct? (p. 39-41)
No sound is produced
•
Are the speakers’ cables connected correctly?
•
Is “Sound Mute” active? (p. 15)
•
Is the volume set to the minimum?
•
Is “Speaker output” set to “Off”? (p. 22)
•
Change “SAP” settings. (p. 18)
•
Check “HDMI 1 in” or “HDMI 2 in” settings.
(p. 22)
Sound is unusual
•
Set “SAP” setting to “Stereo” or “Mono.”
•
Check the HDMI device connected to the unit.
•
Set the audio setting of the HDMI device to
“Linear PCM.”
•
If digital sound connection has a problem,
select analog sound connection.
The main unit is hot.
•
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or
quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with
a tablecloth, etc., and do not place on top of other
equipment.
TC̲26̲32̲lx70̲eng̲0782.indb 47 TC̲26̲32̲lx70̲eng̲0782.indb 47 2007/01/26 19:41:27 2007/01/26 19:41:27