60
Troubleshooting
Before requesting service for this LCD/DVD combo, check the chart below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
For TV broadcasts (VHF, UHF)
Symptoms
Power supply does not go on
Remote control cannot be
operated
Image shakes, or image is
unclear
There are spots on the picture,
or the screen shakes
The image appears doubled
or tripled
A color pattern appears, or
colors disappear
Only a certain channel looks bad
T h e c h a n n e l n u m b e r
disappears from the screen
When the image is not stable,
the screen turns completely
white for a moment
T h e s c r e e n g o e s d a r k
m o m e n t a r i l y w h e n t h e
channel is changed.
The TV makes a hissing
noise occasionally
The screen display shakes
with video input
There are parts at the top
and bottom of the screen
where there is no image
Top and bottom of picture
are missing after zoom
Cause and remedy
•
Is power supply plug unplugged from the outlet?
•
If power will not go on with the remote control, is the power supply of the TV "Off"?
•
Is battery exhausted, or is battery polarity wrong?
•
Is the remote control receiver illuminated with strong light from a fluorescent
lamp etc.?
•
Are you using the special-purpose remote control that come with this equipment?
(The unit will not operate with another remote control.)
•
Is there deterioration, breakage or disconnection of the antenna or antenna wire?
•
Is the antenna wire connected correctly?
•
Is the system affected (by radio wave interference or induced electromagnetic
waves) by external sources (automobiles or trains, high-voltage wires, neon,
motors, magnetized steel frame, or iron rain shutters, etc.)?
➠
Turn off the power supply, and try changing the equipment setup location. If
that has no effect, separate magnet-proofing will be required.
•
Is the antenna direction shifted?
•
Are reflected electromagnetic waves being received from mountains or buildings?
•
Is the equipment being affected by another TV (electromagnetic interference)?
➠
Changing the TV setup location may lead to improvement.
•
Is channel fine tuning correct?
•
Has the screen display button been pressed?
➠
Press the "Screen display button" again.
If the system is switched to external input and there is no external signal
video, the number will disappear.
•
This occurs when the signal for driving the liquid crystal is lost, and is not a
malfunction.
•
The screen is darkened for a moment to conceal noise generated when changing
channels.
•
If the screen and audio are not abnormal, this sound is caused by slight expansion
and contraction of the cabinet due to changes in room temperature. It has no
effect on performance.
•
When input is switched to "video input", this may occur if there is no signal at the
video/audio input terminal.
•
With video software wider than 16:9 (cinema vision size software etc.) there are
parts at the top and bottom of the screen where there is no image.
•
Has the screen position adjustment been left shifted?
➠
Adjust the screen position.
Page
–
13
7
–
–
–
8, 9
–
–
–
–
19
–
–
–
10, 18
21
24
Summary of Contents for TC-15LV1L
Page 34: ......
Page 35: ...35 DVD CD Operation Guide ...
