A-1
LASER SAFETY INFORMATION
Class 1 LASER Product
This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in
effect as of date of manufacture.
Elsewhere, the drive is certified to conform to the requirements of the International
Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser
products.
Class 1 laser products are not considered to be hazardous. To ensure continued product
safety, the following precautions should be heeded.
Caution :
(1) The use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
(2) Do not open the drive unit; no user adjustments or serviceable parts are inside.
• This label is attached to the inner side of the rear wall on the Mechanism chassis
in the built-in drive unit.
L a s e r r a d i a t i o n w h e n o p e n .
AVOID DIRECT EXPOSURE TO BEAM.
DANGER–
• This label is attached to the bottom of the drive enclosed box.
• Dieser Zettel befindet sich angeklebt am Boden des Außengehäuses von
Antriebsaggregat. (For German)
• Cette étiquette est appliquée sur le fond de la boîte extérieure de l’unité d’entraînement.
(For French)
• Denne etiketten är satt nederst på kassen til drive-apparatet. (For Swedish)
• Denne merkelappen er satt nederst på kassen til drive-aggregatet. (For Norwegian)
• Denne markeseddel er sat nederst på kassen til drive-aggregatet. (For Danish)
• Tämä tarra on kiinnitetty ohjainkotelon pohjaan. (For Finnish)
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
APPAREIL A LASER DE CLASSE 1
EN60825
