NO
mçïÉê=pìééäó
ª
Using AC Adaptor
N
Open the DC Input Socket Cover and
connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
O
Connect the AC Cord to the AC Adaptor
and the AC Main socket.
ª
Charging the Battery
Be sure to charge the supplied battery before use.
1
While pressing the
A
part, slide it to
remove the Battery Compartment Cover.
2
Press the terminals of the battery onto
the terminals of the Battery Compartment
and set the battery.
≥
Fit the battery with its label facing upward.
≥
After the battery is set, close the cover.
3
Connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
4
Connect the AC Cord to the AC Adaptor
and the AC Main socket.
≥
Power Lamp
1
flashes, and Charging starts.
≥
When recharging, turn the power of the SD Video
Camera off.
5
Wait until Power Lamp
1
goes off.
≥
When recharging is completed, Power Lamp
1
goes off.
≥
If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal.
(
l
78)
≥
For other notes, see pages 76, 78.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
O
N
1
1
2
4
3
AV100PP.book 12 ページ ２００３年８月２２日 金曜日 午後４時３０分
