![background image](http://html1.mh-extra.com/html/panasonic/sv-ap10e/sv-ap10e_operating-instructions-manual_3980718003.webp)
ENGLISH
3333
Caution for AC mains lead
(For UK Customers Only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three-pin
mains plug for your safety and convenience. A 5-
ampere fuse is fitted in this plug.
Should the fuse need to be replaced, please ensure
that the replacement fuse has a rating of 5-amperes
and it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
Ï
or the BSI mark
Ì
on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a
replacement cover is obtained. A replacement fuse
cover can be purchased from your local Panasonic
Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
If a new plug is to be fitted, please observe the wiring
code as shown below.
If in any doubt, please consult a qualified electrician.
ª
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked
with the letter L or coloured RED.
Under no circumstances should either of these wires
be connected to the earth terminal of the three-pin
plug, marked with the letter E or the Earth Symbol
Ó
.
ª
Before Use
Remove the Connector Cover as follows.
ª
How to replace the Fuse
1) Remove the Fuse Cover with a screwdriver.
2) Replace the fuse and attach the Fuse Cover.
Connector
Cover
Fuse
Cover
Fuse
SV‑AP10B.book 3 ページ 2002年9月18日 水曜日 午前8時55分
Summary of Contents for SV-AP10E
Page 55: ...55 55 55 55 ...