Panasonic SV-AP10 Operating Operating Instructions Manual Download Page 51

Page: 51 / 56

Others

Error Messages for Printer Driver

≥

Please wait until the temperature of printer
decreases.

→

Please wait for a while.

≥

Please check a paper cassette or paper.

→

Insert the paper into the paper cassette and the paper

cassette into this unit.

≥

There is no ink.

→

Insert the new ink cassette.

≥

A paper jam has occurred.

→

Remove the jammed paper and eject/insert the ink

cassette.

≥

Hardware Error occurred. Please abort printing.

→

Consult your dealer.

≥

The printer is not corresponding to this printer
driver. Please abort printing.

→

Install the driver again.

≥

Error occurred. Turn the printer's power off and then
back on, and then click [Restart] for printing or click
[Abort] to abort printing.

→

Restart the job or abort printing after turning the Photo

Printer off and on.

≥

Communication with the printer has failed. First,
check that the printer is connected properly, and
click [Restart] to start printing or click [Abort] to
stop printing.

→

Turn the Photo Printer’s power off and then back on or

disconnect and reconnect the USB connection cable.
Then restart the job or stop the printing.

≥

The selected print size does not match the paper
and ink cassette you have inserted.

→

Confirm that paper corresponding to the ink cassette is

set and restart the job.

≥

Paper is incorrect. Please set properly.

→

Insert correct paper and make sure paper is correctly

set.

AP10U-Eng.book 51 ページ２００２年９月２７日　金曜日　午前１０時８分

Summary of Contents for SV-AP10 Operating

























































Search results

Summary of Contents for SV-AP10 Operating

Reviews:

Related manuals for SV-AP10 Operating

Brands by name

Popular brands

Panasonic SV-AP10 Operating, Operating Instructions Manual

Search results

Summary of Contents for SV-AP10 Operating

Reviews:

Related manuals for SV-AP10 Operating

Brands by name

Popular brands