38
Step 5 :
Detach 2P Cable Wire at connector (CN1006) on the
SW SMPS P.C.B..
Step 6 :
Remove Rear Panel Block.
8.6.2.
Disassembly of Digital Receiver
Module P.C.B.
• Refer to “Disassembly of Rear Panel Block”.
Step 1 :
Detach 24P FFC at connector (CN1) on Digital
Receiver Module P.C.B..
Step 2 :
Remove 1 screw.
Step 3 :
Remove Digital Receiver Module P.C.B..
8.6.3.
Disassembly of SW Power Button
P.C.B.
• Refer to “Disassembly of Rear Panel Block”.
Step 1 :
Detach 4P Cable Wire at connector (CN1002) on the
SW Power Button P.C.B..
Step 2 :
Remove 2 screws.
Step 3 :
Press and hold Power Button.
Step 4 :
Slightly lift up to remove SW Power Button P.C.B..
Summary of Contents for SU-HTB880EB
