AM
Try various directions to obtain
optimum reception.
FM
The headphones cord is also
the FM antenna, so extend it instead of leaving it coiled.
8
RQT7208
Change the frequency step according to the area.
Preparation
: Press [RADIO/BAND] to switch on the power.
Press and hold [RADIO/BAND]
until the step appears.
Within 10 seconds
Press to select the step.
Each time you press [
j :
,
9 i
]
Within 10 seconds
Press and hold [MEMORY/RECALL] until the frequency appears
to confirm the step.
∫
To return to the previous frequency step
Repeat the above procedure.
≥
Changing the step erases the stations you stored in memory.
To obtain good reception
To select stereo or monaural FM
When using overseas
MONO
U0.2
U0.1
E
Changing the sound quality
Set to “MONO” when there is noise during FM reception.
Sound becomes monaural, but noise is reduced.
Each time you press [FM MONO/ST]
The operation is the same as when playing CDs. (
➪
page 6)
To receive an FM broadcast clearly
Set to “CITY” if reception is poor or if there is interference from another
station.
Each time you press and hold [FM RECEPT
%
CITY/NOR]
CITY
No display
(canceled)
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz
FM 0.05 MHz,
AM 9 kHz
No display
(stereo)
1
2
3
Listening to the Radio
M
FM
TUNED
J
U0.2
RQT7208-P.qxd 03.12.3 9:17 AM ページ 8
