No play.
No sound or there is
a lot of noise.
Play doesn’t resume
from the last point
stopped.
Play doesn’t start
from the first track.
The unit stops
working.
Cannot search
through tracks.
Cannot skip albums.
Cannot change the
Digital Re-master
mode, anti-skip mode.
Digital Re-master
does not work.
The battery indicator
fails to appear or is
incorrect.
Radio reception is
noisy.
PY
P
PC
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
see “Product information” on page 4 for assistance.
Troubleshooting guide
1
The model number and serial number of this
product can be found on either the back or
the bottom of the unit.
Please note them in the space provided
below and keep for future reference.
MODEL NUMBER
SL-SV570
SERIAL NUMBER
This manual was printed with soy based ink.
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
C
2003 Matsushita Electric Industrial Co., Ltd.
Printed in Japan
RQT7208-P
F1203TR0
Display
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
p
Portable CD Player
Operating Instructions
SL-SV570
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this
product, please read these instructions
completely. Please keep this manual for future
reference.
≥
The HOLD function is on. Release HOLD (
➪
page 5).
≥
The disc isn’t correctly set.
≥
The disc is scratched or dirty. (Tracks skipped.)
≥
There is moisture on the lens. Wait for about an hour
and then try again.
≥
The lens is dirty: clean it with a blower (recommended
product:
SZZP1038C
). If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
≥
The unit may not read MP3 correctly if it is shaken
while it is reading the files.
≥
Play of a multi-session disc may not be possible if
there is a blank data segment between sessions.
≥
If there is large JPEG data etc. within a MP3 file,
sound may become muted and play may not be
possible.
≥
If you try playing a CD that contains CD-ROM format
data and normal audio data (CD-DA), output from one
of the above may become silent, and play may not be
possible.
≥
Ensure the plugs are inserted firmly.
≥
Wipe the plugs clean with a clean cloth.
≥
Noise may occur when playing MP3 if recording quality
is poor.
≥
The elapsed playing time disappears and sound is
interrupted if bumps continue repeatedly.
≥
Separate this unit from mobile telephones.
≥
This doesn’t work if you change discs.
≥
This doesn’t work during random play.
≥
It may not work correctly under some conditions.
≥
Random play modes may be on (
➪
page 6).
≥
Play resumes from the last point stopped.
Disconnect then reconnect all power sources
(batteries and AC adaptor).
The HOLD function is on. Release HOLD (
➪
page 5).
≥
You haven’t inserted a disc or it isn’t inserted
correctly.
≥
You have inserted a disc this unit cannot play.
The disc lid is open.
The program already contains 20 tracks.
Reading MP3 files.
You cannot search through MP3 files.
You cannot skip between the first and last albums
during play.
If [
:
]or [
9
] is pressed before
[MEMORY/RECALL] you cannot change the mode.
Depending on the type of MP3 disc recording, the
effect may not appear.
≥
The indicator does not appear when the AC adaptor is
connected.
≥
The indicator does not appear correctly under some
conditions.
≥
Keep the unit away from other tuners and televisions.
≥
The AM antena is in the unit, so noise may increase if
you hold the unit.
(
)
*
'
RQT7208-P.qxd 03.12.3 9:17 AM ページ 1
