Panasonic SL-DT300EG, Service Manual

Page: 8 / 105

Item Player mode and
button
combination
Function Display Cancellation
method
DVD laser
drive
current
measure- /
ment In STOP mode,
press “STOP”
button on the
player and “OSD”
button on the
remote control
unit. DVD laser drive current
measurement / DVD laser
drive current is measured
and the result is displayed
together with the initial value
stored in EEPROM. After the
measurement, DVD laser
emission is kept on. Itis
turned off when Standby/on
key is switched off. (It is also
turned off when the primary
power is switched off.) LDD
*1
_034
*2
_032
*3
/
*1
: DVD
laser current measurement
mode /
*2 : Initial current stored
in EEPROM / *3 :Measured
current
The value denotes the current
in decimal notation.
The above example shows the
initial current is 34 mA and the
measured value is 32 mA.
Cancelled
automatically
5 seconds
later.
ADSC
internal
RAM data
check Press “STOP”
button on the
player and “1” or
“2” buttons on
the remote control
unit. ADSC internal RAM data
check / ADSC internal RAM
data is read out and
displayed. / Change the
address with “CANCEL” key
operation to show the data
for 11 addresses. A *1 _0FA *2 _6901 *3 / *1 : ADSC
internal RAM data check mode /
*2
: Address /
*3
: RAM data for
specifiedaddress
The value is shown in
hexadecimal notation. The
above example shows the data
in ADSC address 0FAh is 6901h.
Press
“STOP”
button.