background image

TQBM0010

39

  6. Each time you redistribute the Program (or any work based on the 
Program), the recipient automatically receives a license from the original 
licensor to copy, distribute or modify the Program subject to these terms and 

conditions.  You may not impose any further restrictions on the recipients' 
exercise of the rights granted herein. 
You are not responsible for enforcing compliance by third parties to this 
License.

  7. If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), conditions 
are imposed on you (whether by court order, agreement or otherwise) that 
contradict the conditions of this License, they do not excuse you from the 
conditions of this License.  If you cannot distribute so as to satisfy 
simultaneously your obligations under this License and any other pertinent 
obligations, then as a consequence you may not distribute the Program at all.  

For example, if a patent license would not permit royalty-free redistribution of 
the Program by all those who receive copies directly or indirectly through you, 
then the only way you could satisfy both it and this License would be to refrain 
entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any 

particular circumstance, the balance of the section is intended to apply and 
the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or 
other property right claims or to contest validity of any such claims; this 
section has the sole purpose of protecting the integrity of the free software 

distribution system, which is implemented by public license practices.  Many 
people have made generous contributions to the wide range of software 
distributed through that system in reliance on consistent application of that 
system; it is up to the author/donor to decide if he or she is willing to distribute 
software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a 
consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in certain 
countries either by patents or by copyrighted interfaces, the original copyright 
holder who places the Program under this License may add an explicit 

geographical distribution limitation excluding those countries, so that 
distribution is permitted only in or among countries not thus excluded.  In 
such case, this License incorporates the limitation as if written in the body of 
this License.

  9. The Free Software Foundation may publish revised and/or new versions 

of the General Public License from time to time.  Such new versions will be 
similar in spirit to the present version, but may differ in detail to address new 
problems or concerns.

Each version is given a distinguishing version number.  If the Program 
specifies a version number of this License which applies to it and "any later 

version", you have the option of following the terms and conditions either of 
that version or of any later version published by the Free Software 
Foundation.  If the Program does not specify a version number of this 
License, you may choose any version ever published by the Free Software 
Foundation.

  10. If you wish to incorporate parts of the Program into other free programs 
whose distribution conditions are different, write to the author to ask for 
permission.  For software which is copyrighted by the Free Software 
Foundation, write to the Free Software Foundation; we sometimes make 
exceptions for this.  Our decision will be guided by the two goals of preserving 
the free status of all derivatives of our free software and of promoting the 

sharing and reuse of software generally.

                            NO WARRANTY

  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE 

IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED 
BY APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN 
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, 
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE 
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 
NECESSARY SERVICING, REPAIR OR CORRECTION.

  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY 
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, 
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY 
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 

DATA OR DATA BEING RENDERED INACCURATE OR LOSSES 
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE 
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF 
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest possible 
use to the public, the best way to achieve this is to make it free software 

which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest to attach 
them to the start of each source file to most effectively convey the exclusion 
of warranty; and each file should have at least the "copyright" line and a 
pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

This program is free software; you can redistribute it and/or modify it under the 
terms of the GNU General Public License as published by the Free Software 
Foundation; either version 2 of the License, or (at your option) any later 
version.

This program is distributed in the hope that it will be useful, but WITHOUT 
ANY WARRANTY; without even the implied warranty of 
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See 
the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along 
with this program; if not, write to the Free Software Foundation, Inc., 51 
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it 
starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision 
comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it under certain 
conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the 
appropriate parts of the General Public License.  Of course, the commands 

you use may be called something other than `show w' and `show c'; they 
could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your 
school, if any, to sign a "copyright disclaimer" for the program, if necessary.  
Here is a sample; alter the names:

  Yoyodyne, Inc., hereby disclaims all copyright interest in the program 
`Gnomovision' (which makes passes at compilers) written by James Hacker.

  <signature of Ty Coon>, 1 April 1989
  Ty Coon, President of Vice

This General Public License does not permit incorporating your program into 
proprietary programs.  If your program is a subroutine library, you may 
consider it more useful to permit linking proprietary applications with the 
library.  If this is what you want to do, use the GNU Lesser General Public 
License instead of this License.

SH-WL40-TQBM0010_mst.book  39 ページ  2016年11月29日 火曜日 午後6時20分

Summary of Contents for SH-WL40













































Reviews: