- 17 -
To make network-related settings
You can change this unit’s name on the network, and use specific IP address, etc.
Preparation
≥
Change the IP address settings of the device (PC, etc.) to the ones
below.
For details on how to change these settings, refer to the operating instructions
for your device.
IP Address:
“10.10.10.
” (“
” stands for any number between 1 and 253.)
Subnet mask:
“255.255.255.0”
≥
Connect this unit and the device. (
l
8)
1
Start an Internet browser on your device and then input “http://
10.10.10.254/” into the address field to display the settings page.
2
Input user name and password and select “OK”.
≥
When performing this step for the first time, enter “admin” into both the ID
and password fields.
≥
It may take a few minutes until the settings page is displayed depending on
the environment. In that case, reload the browser.
≥
If you enter a wrong ID or password, close the Internet browser first, and
then follow the steps above again.
You can also change the name of this unit by changing a setting in the app
“Panasonic Music Streaming” (version 3.1.0 or later) (
l
11).
For details on the app, refer to the site below.
http://panasonic.jp/support/global/cs/audio/app/
(This site is in English only.)
Select English
or French.