- 16 -
≥
Do not connect a LAN cable to ALL speaker. Doing so will disable the
Wi-Fi function.
1
Set your ALL speaker to WPS Connection mode.
≥
For details, refer to the Operating Instructions for the ALL speaker.
2
Press and hold the WPS button on this unit for at least 3
seconds.
≥
The WPS indicator blinks. The WPS indicator blinks for about 2 minutes
until the connection is completed.
≥
When the connection is complete, the WPS indicator will light up for about
10 seconds.
≥
The default setting is 5 GHz.
Go to the advanced setup screen to switch to 2.4 GHz. (
l
27)
≥
The WPS indicator blinks fast for about 1 minute when a connection attempt
fails.
Using WPS (Wi-Fi Protected Setup
TM
)
