(All schematic diagrams may be modified at any time with
the development of new technology)
Notes:
S1000:
ID SET switch.
S1001:
POWER switch.
·
Importance safety notice :
Components
identified
by
mark
have
special
characteristics important for safety.
Furthermore, special parts which have purposes of fire-
retardant (resistors), high-quality sound (capacitors), low-
noise (resistors), etc. are used.
When replacing any of components, be sure to use only
manufacturer´s specified parts shown in the parts list.
·
Capacitor values are in microfarad(µF) unless specified
otherwise, F=Farad, pF=Pico-Farad
Resistance values are in ohm(
Ω
), unless specified
otherwise, 1K=1,000
Ω
, 1M=1,000K
Ω
·
Voltage and Signal lines:
: +B Signal line
: -B Signal line
: Main signal line
: RF signal line
Special Note :
·
This model uses Switching Mode Power Supply (SMPS) for
providing necessary voltages.
·
There is no schematic drawings included in this document
for the SMPS Module.
·
It is advisable to replace the SMPS module as an assembly
unit.
15 Notes of Schematic Diagram
37
SH-FX65P / SH-FX65PC
Summary of Contents for SH-FX65P
