Panasonic SG-P Series, Instruction Manual

Page: 24 / 76

2.3 Parts of the Device
■
Compact type
Switch body
Name Function
1 Indicator
Lights green “ ”
When the actuator is detected
Lights red “ ”
When the actuator is not detected
Blinks red “ ”
● Lockout state, error occurrence
(Note 1)
● When the teaching sequence was incorrect (only
when using high-code models)
(Note 1)
Blinks green “ ”
● When multiple units are connected, the actuator is
not detected by other switch bodies (standard unit
or sub unit).
● When multiple units are connected, an error has
occurred in other switch bodies (standard unit or
sub unit).
Lights yellow “ ”
(Simultaneously light
green and red)
After the power supply is turned ON, during self-
diagnosis
Alternately blinking red to
yellow
“
⇔
”
(lights red, blinking green)
When an unpaired actuator is detected (only when
using high-code models)
2
Actuator detection
surface
When the actuator is brought near to the surface, the switch body detects the
actuator.
3 Mounting hole
Use M4 screws, flat washers, and spring washers to mount the switch body on a
machine unit or on a guard.
(Note 1) Error contents are different depending on the number of blinkingsFor details, refer to
"6 Troubleshooting" .
2.3 Parts of the Device
2-8 WUME-SGPUM-2