manualshive.com logo in svg

Panasonic SFB-HC, Instruction Manual

Share
Download
Panasonic SFB-HC Instruction Manual Download Page 40

39

© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V

CHAPTER 4  TROUBLESHOOTING

Symptoms

Cause

Remedy

Control output (OSSD 
1 / 2) is not turned ON.

This device is connected to the 

SF4B 

/ 

SF4B<V2>

 series.

Disconnect this device.

Symptoms

Cause

Remedy

Safety output 1 / 2 is 
not turned ON.

This device is connected to the 

SF-C14EX

. Disconnect this device.

Error indication

Cause

Remedy

The fixed blanking function is set in all 
lights received / all lights blocked condi-
tion, or the muting function is set in all 
lights received condition.

#*&
lights received / all lights blocked condition, 
or the muting function in all lights received 
condition.

The copy function is used for the units 
"&%$&$
each other (the number of sensors / the 
number of beam channels / model No. is 
not same).

Use the copy function for the units having 
%$&

In the copy function, download the data 
without uploading.

Upload the data before downloading.

The password does not match.

Input the correct password. In case you for-
get the password, contact us. (Note)

Sensor communication error 1
(Model No. is wrong)

Connect this device to 

SF4B 

/ 

SF4B<V2>

 

series.

Sensor communication error 2

Wrong wiring between the emitter and 
receiver.

Connect the emitter and receiver correctly.

Sensor communication error 3

Effect from noise or failure of internal 
circuit

Check the noise state around the 

SF4B 

/ 

SF4B<V2>

 series.

Failure of EEPROM in this device.
(Failure on device)

Contact us.

Failure of EEPROM in this device.
(Failure on EEPROM data)

Contact us.

Note: The factory setting of the 

SF4B

 / 

SF4B<V2>

 series password is “0000.”

If this device does not work, press ENTER key or CANCEL key one minute after pressing ENTER 
key.
If the device does not work correctly after checking the items above, please consult us.

Summary of Contents for SFB-HC













































Reviews:

No comments

Brands by name

Popular brands

Load more brands