Panasonic Section 520 Installation And Feature Description Download Page 29

Page: 29 / 54

Section 520 - TSAPI

Chapter 5. Maintenance and Troubleshooting

DBS-92-520

Issued April 2000

TDILOGERROR(dname, ERROR, ALMLOC, a+,
"Preceive(txrxReceivePort) fail.");TDILOGERROR(dname, ERROR,
ALMLOC, a+, "Preceive(txrxThreadPort) fail.")

TDILOGERROR(dname, ERROR, ALMLOC, a+,
"Preceive(appl_RX_Port) fail.")

“AUDIT TRAIL” Messages:

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Display DBS-PC IO stopped")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Display DBS-PC IO started")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+, "Log
File Closed");TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC,
a+, "Log File Opened")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Manual DBS reset command sent")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"MWI extension changed to %d", MWIExt)

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Manual monitor started on port %d", port)

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Manual monitor stop issued for port %d", port)

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Port Monitor Checking %s", (PortMonitorChecking == False) ?
"disabled" : "enabled")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"DCD Level Checking %s", (CheckDCD == False) ? "disabled" :
"enabled")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Watchdog Checking %s", (CheckWDTimer == False) ? "disabled" :
"enabled")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"CSTA clearcall function setting changed to %s", (cfp->clearcall == 0) ?
"disabled" : "enabled")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"SendInitOnMakecall setting changed to %s", (cfp-
>sendinitiatedonmakecall == 0) ? "disabled" : "enabled")

TDILOGERROR(dname, AUDIT_TRAIL, ALMLOC, a+,
"Send Fail Events setting changed to %s", (cfp->sendfail == 0) ?
"disabled" : "enabled")

Summary of Contents for Section 520























































Search results

Summary of Contents for Section 520

Reviews:

Related manuals for Section 520

Brands by name

Popular brands

Panasonic Section 520, Installation And Feature Description

Search results

Summary of Contents for Section 520

Reviews:

Related manuals for Section 520

Brands by name

Popular brands