93
VQT2N91
∫
To disconnect USB cable
safely
1
Double click the
icon in task tray
displayed on the PC.
≥
Depending on your PC’s settings, this
icon may not be displayed.
2
Select [USB Mass Storage Device]
and click [Stop].
3
Verify [MATSHITA SDR-S50/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-S45/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-T55/SD USB
Device] or [MATSHITA SDR-T55/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-T50/SD USB
Device] or [MATSHITA SDR-T50/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-H95/SD USB
Device] or [MATSHITA SDR-H95/HDD
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-H85/SD USB
Device] or [MATSHITA SDR-H85/HDD
USB Device] is selected and click
[OK].
Charging the battery using USB bus power
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥
When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with the power of this unit turned on.
≥
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
≥
Do not use any other USB cables except the supplied one.
*
≥
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥
During charging, the status indicator flashes. When charging is finished, the status
indicator turns off.
≥
Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and
then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (
14)
≥
Charging will take 2-3 times longer than charging with the AC adaptor.
≥
Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).
≥
If the status indicator flashes at a particularly fast or slow rate, refer to page 110.
* A USB cable is not supplied with the SDR-S45.
SDR-S50
SDR-S45
SDR-T55
SDR-T50
SDR-H95
SDR-H85
