35
VQT2N91
This unit will resume recording pause mode
about 0.8 seconds after the LCD monitor is
reopened.
≥
Start time will not shorten if there is no SD
card inserted.
/
Start time will be shorten if the [Built-
inMemory] is selected in the [MEDIA
SELECT], even if there is no SD card
inserted.
/
Start time will be shorten if the [HDD] is
selected in the [MEDIA SELECT], even if
there is no SD card inserted.
¬
Change the mode to
.
1
Select the menu. (
23)
2
Close the LCD monitor while
the mode is set to
.
The status indicator
A
flashes green and the
unit goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit
is put into recording pause.
≥
When in quick start standby mode
about 70% of the power used in
recording pause mode is being
consumed, so the recording time will
be reduced.
≥
Quick start standby mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
It may take some time for automatic white
balance to adjust.
≥
In the quick start mode, the zoom
magnification becomes 1
k
.
≥
If [ECONOMY] (
25) is set to
[5 MINUTES] and the unit automatically
goes into quick start standby mode, close
the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
When the power is turned on with the mode
set to
, the unit will enter the recording
pause mode after about 1.9 seconds.
Select the menu. (
≥
In the quick power on mode, the zoom
magnification becomes 1
k
.
Quick start
[SETUP]
#
[QUICK START]
#
[ON]
SDR-T55
SDR-T50
SDR-H95
SDR-H85
Quick power on
[SETUP]
#
[QUICK POWER ON]
#
[ON]