Panasonic SDR-S7 Operating Instructions Manual Download Page 96

Page: 96 / 116

VQT1R00

When using the unit

●

Keep the SD Video Camera as far away as possible from electromagnetic

equipment (such as microwave ovens, TVs, video games etc.).

• If you use the SD Video Camera on top of or near a TV, the pictures and

sound on the SD Video Camera may be disrupted by electromagnetic wave
radiation.

• Do not use the SD Video Camera near cell phones because doing so may

result in noise adversely affecting the pictures and sound.

• Recorded data may be damaged, or pictures may be distorted, by strong

magnetic fields created by speakers or large motors.

• Electromagnetic wave radiation generated by microprocessors may

adversely affect the SD Video Camera, disturbing the pictures and sound.

• If the SD Video Camera is adversely affected by electromagnetic equipment

and stops functioning properly, turn the SD Video Camera off and remove
the battery or disconnect AC adaptor.
Then reinsert the battery or reconnect AC adaptor and turn the SD Video
Camera on.

●

Do not use the SD Video Camera near radio transmitters or high-voltage

lines.

• If you record near radio transmitters or high-voltage lines, the recorded

pictures and sound may be adversely affected.

●

Use the cord or cable supplied with the unit or other devices. Do not extend

the cords and the cables.

●

Do not expose the unit to insecticide or volatile substances, or allow prolonged

contact with rubber or vinyl products. (This can cause deformation and
peeling.)

●

Do not drop or impact the unit while carrying.

• Strong impacts may damage the outer casing, causing it to malfunction.

●

Do not use the unit for business purposes such as surveillance.

• This unit is not of professional grade, and can build up heat internally over

extended use, resulting in trouble.

●

Before long periods of disuse:

• Wipe away moisture and dirt with a soft dry cloth, dry naturally and store with

desiccant (silica gel).

Others

Cautions for use

Summary of Contents for SDR-S7





















































































































Search results

Summary of Contents for SDR-S7

Reviews:

Related manuals for SDR-S7

Brands by name

Popular brands

Panasonic SDR-S7, Operating Instructions Manual

Search results

Summary of Contents for SDR-S7

Reviews:

Related manuals for SDR-S7

Brands by name

Popular brands