background image

43

VQT1R00

43

VQT1R00

Operation icons can be used to set effects, compensate brightness or 
perform other operations in one easy step.

 indicates functions used with motion pictures and 

 functions used with 

still pictures.

  It is not possible to set the PRE-REC function when less than one minute is 

left for recording pictures.

  When recording has been started within 3 seconds after the PRE-REC 

function was set, the scenes starting from the moment when this function was 
set will be recorded.

  The camera shake which occurs when the record button is pressed or the 

sound of the button being operated may be recorded.

  It is not possible to add any fade effects (P.39).

Self-portrait recording function 

 

If you turn the LCD monitor toward the lens side, you can record pictures of 
yourself as you look at the LCD monitor.

 Set the mode dial to [

] or [

].

 Turn the LCD monitor toward you (toward the lens side).

  The picture you will see displayed on the 

LCD monitor is an image of yourself with 
the left and right sides reversed just like 
when you look at your reflection in a mirror. 
(The image which is recorded is the normal 
image of yourself.)

  Only part of the screen display appears. 

When [

] is displayed, turn the LCD 

monitor back in the direction of normal 
recording, and check what the message 
says.

 Start recording.

  No operation icons are displayed during self-portrait recording even when the 

cursor buttons are pressed.

Summary of Contents for SDR-S7





















































































































Reviews: