88
LSQT1214
Others
≥
In the following cases, the unit may not turn off
even when you set this to [5 MINUTES].
j
When using the AC adaptor
j
When connecting the unit to a computer or
printer via the USB cable
∫
[BEEP SOUND]
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the computer or
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(
l
91)
∫
[INITIAL SET]
When there is a menu that cannot be selected
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
(The language setting cannot be changed back
to the initial shipping condition.)
∫
[ILLUMINATION]
This allows operations to be signaled by the
lighting of the illumination LED on the top of the
unit.
1 Flash
When you turn on the power
(When in a recording mode: in orange)
(When in a playback mode: in blue)
2 Flashes
When you switch the mode to a recording mode
(in orange)
When you switch the mode to a playback mode
(in blue)
Lights
During motion picture recording (in orange)
During playback and while connected to a
computer, a printer, etc. (in blue)
Flashes continuously
While formatting, copying, deleting, etc. (in
orange)
∫
[DEMO MODE]
This item is used to start the unit demonstration.
(Only when using the AC adaptor and the mode
dial is at the
or
position)
If you set this to [ON] without inserting an SD
card, this unit is automatically set to the
demonstration mode for introducing its functions.
If any button is pressed or operated, the
demonstration mode is cancelled. If no
operations take place for approx. 10 minutes, the
demonstration mode automatically starts. To
terminate the demonstration mode, insert an SD
card, or set this to [OFF]. For normal use, set this
function to [OFF].
≥
[OFF]
≥
[ON]
≥
[YES]
≥
[NO]
≥
[OFF]
≥
[ON]
≥
[OFF]
≥
[ON]
LSQT1214_GN.book 88 ページ ２００７年２月８日 木曜日 午後８時５０分
