16
5 Troubleshooting Guide
Before troubleshooting, operate the main body test mode in the following procedure in order to check the P.C.Boards.
5.1.
Self check mode
5.1.1.
Electric power breakdown mode
• Transfer the main body in a low consumption electricity
mode and let you maintain a state of the low voltage.
• Detect the normalcy return of the power supply and let you
return to a former state.
Load control
• LED indication: Turn off all LED.
• LCD indication: Turn off all LCD.
• Buzzer information: DO NOTHING
• Heater: OFF
• Motor: OFF
• YD / RD: OFF
• During cooking, save blackout information.
• If it is the blackout that is more than it for ten minutes, I do a
mode with "wait mode - function choice - fault choice".
Indication on LCD
• If it is under blackouts for ten minutes, LCD indication for the
indication of the mode before a blackout enters.
If it is a blackout, display "wait mode - function choice - non-
choice" more than ten minutes.
Summary of Contents for SD-ZB2502BXC
