Panasonic SCPM41 - MINI HES W/CD PLAYER, Operating Instructions Manual

Page: 5 / 20

5
RQT8043
Optional antenna connections Optional antenna connections
FM outdoor antenna AM outdoor antenna
AM ANT
FM ANT
EXT
LOOP
75
/NLY
5SETHEANTENNA
PLUGADAPTOR
INCLUDED
FM outdoor antenna
(not included)
75 coaxial
cable
(not included)
AM ANT
FM ANT
EXT
LOOP
75
M
AM outdoor antenna
(not included)
AM loop antenna
(included)
• Never use an outdoor antenna during a lightning storm.
• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally
along a window or other convenient location.
Step 2 Step 2
- Inserting batteries into the remote control - Inserting batteries into the remote control
!!2,2
■
Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
• Do not use rechargeable type batteries.
• Mishandling of batteries can cause electrolyte leakage which can damage
items the fl uid contacts and may cause a fi re.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to fl ame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
■
Use
• Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7 m directly in front of the unit.
Refer to page 6 for the remote control sensor position.
SStep tep 33
- - DEMO function DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be shown
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [STOP
7
, –DEMO].
The display change each time the button is held down.
DEMO OFF DEMO ON
While in standby mode, select “DEMO OFF” to reduce power consumption.
PM41_8043-1B.indd 5 PM41_8043-1B.indd 5 3/1/05 4:53:58 PM 3/1/05 4:53:58 PM