background image

12

RQT8043

Cassette tape – Play and record

TPS (Tape Program Sensor)

TPS (Tape Program Sensor)

This function enables you to search the beginning of a track, 
up to a maximum of 9.

Press [

4

/REW/

4

] or [

3

/FF/

¢

] during play.

Play resumes from the track found.

TPS may not function properly with:
•  Short silent parts
•  Noise occurs between tunes
•  Silent parts found within tunes

Before recording

Before recording

Preparation

Wind up the leader tape so that recording can begin 
immediately.

•  Use normal position tape.
•  High position and metal position tape can be used, but this unit will 

not be able to record or erase them correctly.

Preparatory steps

Preparatory steps

For the United Kingdom and Continental Europe.

1

Insert the cassette to be recorded on.

""

Insert inside the 
guides

Forward side

The tape direction is automatically set to “

3

”.

To record on the reverse side

Press [TAPE 

`

] twice, then press [CLEAR 

7

].

2

Press [PLAY MODE] to select the reverse mode.

Each time you press the button:

 

=

 

 

=

 

 

One side only records.

 

  Both sides are recorded (forward 

=

 reverse).

” automatically changes to “

” when you press

[

REC/

8

].

For Australia and N.Z..

Insert the cassette to be recorded on.

To record on the reverse side

Turn the cassette over.

Basic play

Basic play

1

Press [OPEN 

0

] on top of the unit.

2

Insert a cassette.

""

Insert inside the 
guides

Forward side

3

Close the lid by hand.

For the United Kingdom and Continental Europe, 
continue with steps 4 to 5.

For Australia and N.Z., proceed to step 6.

4

Press [PLAY MODE] to select the reverse mode.

Each time you press the button:

 

=

 

 

=

 

  One side plays.
  Both sides play (forward 

=

 reverse).

  Both sides are played repeatedly until you press 

[CLEAR 

7

].

5

Press

 

[

TAPE

 

`

]

 

to

 

start play.

Each time you press the button:

3

 : The forward side (front) plays.

2

 : The reverse side plays.

6

Press

 

[

TAPE

 

3

]

 

to

 

start play.

To play on other side of the cassette, turn the cassette 
over.

To

Action

stop tape playback

Press [CLEAR 

7

].

start one touch play

Press [TAPE 

`

] when the system is OFF 

with the cassette loaded.

fast-forward and 
rewind

Press [

4

/REW/

4

] or [

3

/FF/

¢

] in the 

stop mode.

Top of the unit

Cassette lid

PM41_8043-1B.indd   12

PM41_8043-1B.indd   12

2/21/05   9:18:42 AM

2/21/05   9:18:42 AM

Summary of Contents for SCPM41 - MINI HES W/CD PLAYER





















Reviews: