Operations
RQT9772
25
∫
Remote control code
When other Panasonic devices respond to this
system’s remote control, change the remote control
code on this system and the remote control.
Preparation
≥
Turn off all other Panasonic products.
≥
Turn on the main unit.
Change the remote control code to code 2:
1
Aim the remote control at the main unit’s
remote control sensor.
2
Press and hold [MUTE] and [
] on the
remote control for more than 4 sec.
≥
All the indicators will blink for 10 sec when the
code of this system is changed.
≥
The setting is maintained until it is changed again.
≥
If the main unit does not operate after changing the code,
repeat steps 1 and 2.
≥
To change the remote control code to code 1, repeat the
steps above, but replace [
] with [INPUT SELECTOR].
∫
To reduce the clear-mode dialog effect
When the dialog does not sound natural while the
volume is set low, it is possible to reduce the
dialog enhancing effect as follows:
While pressing and holding [SOUND] on the
remote control, press and hold [
s
VOL] on the
main unit for more than 4 sec.
≥
All the indicators will blink once when the clear-mode
dialog effect is reduced.
≥
Even if clear-mode dialog effect is reduced, dialog effect
level is still adjustable.
To reset the setting, return to the factory preset. (
>
26)
∫
To turn off VIERA Link “HDAVI Control”
When “HDAVI Control” compatible equipment
does not work well with this system, for example,
it is possible to turn off this function as follows:
≥
When VIERA Link is turned off, the ARC
function is not available. Be sure to connect the
optical digital audio cable. (
>
16)
1
While pressing and holding [MUTE] on the
remote control, press and hold [
s
VOL] on
the main unit for more than 4 sec.
2
After the setting has changed, turn off all the
connected devices and then turn them on again.
≥
All the indicators will blink once when VIERA Link “HDAVI
Control” is turned off.
To reset the setting, return to the factory preset. (
>
26)
∫
To turn off the volume limitation
If a state of the lowered volume disturbs you
every time the main unit turns on, for example, it
is possible to turn off this function as follows:
While pressing and holding [MUTE] on the
remote control, press and hold [VOL
i
] on the
main unit for more than 4 sec.
≥
All the indicators will blink once when the volume limitation
is turned off.
To reset the setting, return to the factory preset. (
>
26)
Others
SC-HTB170EGEBGN_RQT9772-B.book 25 ページ ２０１３年２月４日 月曜日 午前９時５分
