45
RQT7388
See below for details.
[DVD-A]
[DVD-V]
[VCD]
[CD]
Available sound settings:
Dolby Pro Logic
II,
Subwoofer level, Center Focus, Sound Field
Control, Super Surround
After making the sound field or sound quality settings
Press and hold
[SHIFT]
i
[C.S.M].
∫
Recall the settings
The unit recalls the settings when you play the disc again.
≥
The settings are replaced if you change them.
≥
When you store settings for the 31st disc, the settings for the earliest
disc are cleared.
≥
Press [SHIFT]
i
[C.S.M] while “CSM” is displayed and the settings
return to those that were current before the settings were recalled.
≥
Press [SHIFT]
i
[C.S.M] while “CSM” is out and you are playing a
disc for which you stored settings and those settings are recalled.
You can output the down-mixed 2 channel signal when necessary
(e.g. when you intent to record 5.1ch sound on other recording
equipment).
Press
[SHIFT]
i
[MIX 2CH].
To cancel
Press [SHIFT]
i
[MIX 2CH] again.
[Note]
When “D.MIX” flashes on the display, the disc contains multiple-
channel signals that cannot be down-mixed.
[DVD-A]
Press [SUBWOOFER LEVEL].
SUB W 1
>
SUB W 2
>
SUB W 3
>
SUB W 4 (factory preset)
^--------------------------------------------------------------}
This is the one of ways to get the appropriate surround effect. Adjust
the speaker level to the same level as the front speakers.
1
Press [SHIFT]
i
[TEST] to output a test
signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
≥
There is no output from SW (subwoofer) channel.
2
Press [VOLUME,
r
] or [
s
] to set the
volume level normally used for
listening.
3
Press [
3
] (increase) or [
4
] (decrease)
to adjust the speaker level for each
speaker.
C, RS, LS:
j
6 dB to
i
6 dB
(L, R: Only the balance is adjustable.)
≥
To adjust the balance of the front speakers
While outputting the test signal, press [
2 1
].
To stop the test signal
Press [SHIFT]
i
[TEST] again.
∫
To adjust speaker level during play
1
Press [CH SELECT] to select the speaker.
L
>
C
>
R
>
RS
>
LS
>
SW
^-----------------------------------------}
SW: Subwoofer
≥
You can only adjust SWch if the disc includes a subwoofer
channel.
≥
SWch does not appear on the display and is not adjustable
when Dolby Pro Logic
II
or Dolby Pro Logic turned on.
2
Press [
3
] (increase) or [
4
] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW:
j
6 dB to
i
6 dB
(L, R: Only the balance is adjustable.)
≥
To adjust the balance of the front speakers
During play, press [
2 1
].
only
Custom Sound Memory
Stores up to 30 sound setting (one setting per disc).
only
Down-mixing
Down-mixes multi-channel signals to 2 channels.
Subwoofer level
Adjusts the amount of bass.
Speaker level adjustments
VOLUME
1
2
3
4
5
6
7
8
0
100
9
CH
NAVI
CANCEL
SPEED
PROG
SKIP
SLOW/SEARCH
MENU
ENTER
DIRECT
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TV
FM/AM
DVD/VHS
DVD
TV
VHS
TUNER
DISC 1
DISC 2
DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECT
JET REW
CD MODE
DISC 5
S
10
ENTER
PLAY
LIST
TV VOL
TV VOL
RESET
TV/VIDEO
PAGE
GROUP
MIX 2CH
SUBTITLE
REPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVEL
C.S.M
SFC
C.FOCUS
SUPER SRND
PROGRESSIVE
MUTING
POSITION
MEMORY
ZOOM
QUICK REPLAY
REC
SLEEP
PL
AUDIO
TEST
CH SELECT
SHIFT
INPUT SELECTOR
SHIFT
C.S.M
SFC
r
MIX 2CH
SUBTITLE
r
SHIFT
MULTI RE-MASTER
SUBWOOFER LEVEL
TEST
CH SELECT
r
SHIFT
Custom Sound Memory
Down-mixing
Subwoofer level
CSM
Speaker level adjustments
DVD
DVD
7388en.book 45 ページ ２００３年１２月２２日 月曜日 午後９時３９分
