RQT7796
4
(R)
(L)
2
AM loop antenna
Stand the antenna
up on its base.
1
2
1
2
4
AC mains lead
1
FM indoor antenna
Tape the antenna where
reception is best.
1
2
Adhesive
tape
Adhesive
tape
For Europe
For others
For Europe
For others
Connector
Appliance
inlet
Approx. 6 mm
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2
BEFORE CONNECTION.
Note
The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
For your reference
To save power when the unit is not to be used for a long time, unplug it
from the household mains socket. You will need to reset some memory
items after plugging in the unit.
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type of
inlet used, the front part of the
connector may jut out as shown in
the drawing. However there is no problem using the unit.
Set-up
Connect the AC mains lead only after all other connections have been made.
Optional antenna connections (
A
page 11).
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
When the unit is first plugged in, a demonstration of its functions may
be shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [DISP, –DEMO].
The display changes each time the button is held down.
NO DEMO (off)
DEMO ON (on)
While in the standby mode, select “NO DEMO” to reduce power
consumption.
Note
DEMO function cannot be turned on when Dimmer is on.
Turning the demo function on/off
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
Connection
3
Speakers
Placement
AK330
Place the front speakers so that the super tweeter is on the
inside.
AK230
Speakers are designed identically so that no left or right channel
orientation is necessary.
Note
•
Keep your speakers at least 10 mm away from the system for
proper ventilation.
•
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
You cannot take the front net off the speakers.
Caution
•
Use the speakers only with the recommended system. Failure
to do so may lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience
a sudden change in performance.
•
Do not attach these speakers to walls or ceilings.
H.BASS
DISP, –DEMO
AK330
Gray
2
1
3
Connect the
left (L) side in
the same way.
Gray (+) Blue (–)
Red (+)
Black (–)
Blue
Black
Red
AK230
1
3
2
Red (+)
Black (–)
Connect the
left (L) side in
the same way.
Red
Black
To household mains socket
Super tweeter
Super tweeter
Main unit
Front speaker
(left)
Front speaker
(right)
(SB-AK230) (SB-AK330)
(SB-AK330)
(SB-AK230)
