19
RQT5539
Cassette deck operations
1
A
2
3
4
5
5
1
4
2
3
2
Listening to tapes
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I
✓
HIGH POSITION/TYPE II
✓
METAL POSITION/TYPE IV
✓
You can use either deck 1 or deck 2 for tape playback.
1
Press [TAPE, DECK 1/2].
The unit will come on automatically.
If the unit was off and a cassette was loaded, play will start
automatically (One touch play function).
2
Press [
c
DECK 1 OPEN] or [
c
DECK 2 OPEN] and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
3
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is played, then playback stops automatically.
: Both sides (front side
→
reverse side) are played one
time each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
Press [
/
] or [
-
] to start playback.
[
-
] : The forward side (front side) will play.
[
/
] : The reverse side will play.
5
Adjust the volume level.
To stop tape playback
Press [
L
].
To change the deck to be used
A
Press [TAPE, DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select “
”. Both tapes will be
played 8 times each.
Note
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
Deck in use
Front side
Tape direction
