24
10.3. Disassembly Procedure
10.3.1. Top Panel
1. Remove the 6 Black Screws.
2. Open the both ends at the rear side of the Top Panel in
the direction of arrow (1), then pull up the top panel in the
direction of arrow (2) to remove it.
10.3.2. Front Panel Unit
10.3.2.1. Tray Ornament
1. Insert paper clips, etc. into the hole on the unit bottom,
then slide the gear in the direction of arrow (1) to eject the
tray slightly.
2. Unlock 2 tabs.
3. Pull the Tray Ornament in direction of arrow (2).
10.3.2.2. Front Panel Unit
1. Disconnect the connector (A), connector (B),and FFC
cable.
2. Unlock 5 tabs (A) - (E).
3. Pull the Front Panel Unit in the direction (1).
10.3.3. Front Panel P.C.B. / MIC P.C.B.
1. Remove 5 Screws (B).
2. Remove two Matel Plats
.
3. Pull out the Front Panel P.C.B. unit.
Screw(B)
Front Panel P.C.B.
Metal Plate
Disc Tray
Tab
(2)
Tray Ornament
(1)
Disc Tray
Paper
clip,etc.
Top Panel
(1)
(2)
(1)
Black Screw
Black Screw
Black Screw
Tab(C)
Tab(D)
Tab(A)
Tab(E)
Front Panel
Connector(A)
FFC
Tab(B)
(1)
Connector(B)
