19
VQT5F18
Ad
van
ced
o
p
e
ra
ti
o
n
s
Secure the speaker.
Using the tie down area on the rear of the speaker
and a cord (not supplied), secure the speaker to a
wall anchor (not supplied) permanently attached
to the wall.
1
Thread a cord to the speaker.
≥
Use a cord of less than
‰
2.0 mm, which is
capable of supporting over 10 k
g
.
e.g.,
[XH385]
Front speaker
A
Cord (not supplied)
2
Thread a cord from the wall to the speaker
and tie tightly.
B
Wall anchor (not supplied)
C
Wall or pillar
D
Approx.150 mm
E
Approx.100 mm
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
You can download the latest firmware from the
following website and burn it to a CD-R to update
the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
is in process.
After the firmware is installed, “donE” will be
displayed on the unit’s display.
To prevent tipping/falling of
the speakers
When mounted on a wall
When placed on the floor
SC-XH385&333GSGA-VQT5F18_mst.book 19 ページ ２０１４年３月１０日 月曜日 午後２時０分
