RQT7703
Recording operations
Cassette deck operations
11
ENGLISH
CD play mode function for MP3
Remote control only
Preparation: Press [
:
CD] and then [
L
CLEAR].
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC
→
1-SONG
→
1 DISC
ALL-DISC:
Plays all loaded discs in succession from the
selected disc to the final disc .
1-SONG:
Plays one selected track on the selected disc.
1-DISC:
Plays one selected disc.
(The original display is restored in about 2 seconds.)
2
Press [DISC] and
(within 10 seconds)
[1]–[5] to select the
disc.
The CD starts.
3
When you selected “1-SONG” in step 1
Press [SHIFT]
µ
[ALBUM ( or )] to select the album.
Play starts from the first track of the selected album.
4
When you selected “1-SONG” in step 1
Press [
f
4
] or [
g
3
] to select a track and press
[
:
CD].
Play starts.
To stop play
Press [
L
CLEAR].
When playback ends
The current play mode will be retained in memory until it is changed
even if the unit is turned off.
Final disc
For example, if play starts from disc 4, disc 3 will be the “final disc”.
Order of progression: Disc 4
z
5
z
1
z
2
z
3
Note
You cannot use program mode together with CD Play Mode function.
→
Program play for MP3
You can program up to 24 tracks.
Remote control only
Preparation:
1. Turn the television on, select the video input with the television
input switch.
2. Select the desired disc (
A
page 6)
3. Press [
L
CLEAR].
1
An album list appears.
Press [PROGRAM].
2
Press [
8
,
9
] to select an album and press [ENTER].
3
A track list appears.
Press [
8
,
9
] to select a track and press [ENTER] to
add it to the program.
Repeat this step to program other tracks.
To program from another album
1. Press [SHIFT] + [
].
2. Do steps 2-3.
4
Press [
:
CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. You can replay your
program by pressing [PROGRAM] then [
:
CD].
You can do the following while “P” is displayed
•
To check program contents
Press [
f
4
] or [
g
3
].
Every time you press the button, the track number and program
order are displayed.
•
To add to the program
While checking program contents
Press [ENTER].
Do steps 2-3.
•
To clear all tracks
Press [
L
CLEAR].
Note
• You cannot program more than one disc for MP3.
• You cannot program CD-DA tracks together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the CD tray.
4
SHIFT
4
4
How discs with MP3 differ from CDs
