11
TQ
BJ
09
76
11
█
Selecting a preset station
1
Press [PLAY MENU] to select “TUNE MODE”.
2
Press [
R
,
T
] to select “PRESET” and then press
[OK].
3
Press [
2
/
3
] or [
5
/
6
] to select the preset
station.
Secondary service
You can listen to secondary services when “
” is
shown.
1
Press [PLAY MENU] to select “DAB SECONDARY”.
2
Press [
R
,
T
] to select the secondary service and
then press [OK].
To cancel, select “PRIMARY”.
Note:
The setting is cancelled when you select other stations.
Viewing available information
You can view the following information on the display
panel:
• Information about the DAB broadcast
• Programme type
• Ensemble label
• Frequency
• Time
Press [DISPLAY].
Checking the signal quality
You can check the signal quality when adjusting the
antenna.
1
Press [PLAY MENU] to select “SIGNAL QUALITY”
and then press [OK].
The frequency block followed by the reception quality
is shown.
To select other frequency blocks, press [
R
,
T
].
2
Press [OK] again to exit.
Automatic clock adjustment
You can set the clock to update automatically.
1
Press [PLAY MENU] to select “AUTO CLOCK ADJ”.
2
Press [
R
,
T
] to select “ON ADJUST” and then
press [OK].
To cancel, select “OFF ADJUST”.
Clock and timers
Setting the clock
This is a 24-hour clock.
1
Press [SETUP] to select “CLOCK”.
2
Press [
R
,
T
] to set the time and then press [OK].
To check the time
Press [SETUP] to select “CLOCK” and then press
[OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
1
Press [SETUP] to select “SLEEP”.
2
Press [
R
,
T
] to select the setting (in minutes) and
then press [OK].
To cancel, select “OFF”.
Note:
•
The remaining time is shown for a few seconds every
minute. “SLEEP 1” is always shown when only 1 minute
remains.
•
The play timer and sleep timer can be used together.
•
The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
(Except for Bluetooth
®
and AUX source)
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [SETUP] to select “TIMER ADJ”.
2
Press [
R
,
T
] to set the start time and then press
[OK].
3
Do step 2 again to set the end time.
4
Press [
R
,
T
] to select the source you want to play
and then press [OK].
Frequency
block
Frequency
Reception quality
0 (poor) to 8 (excellent)
ENGLISH
SC-UX102.100 E TQBJ0976 (01) En.fm Page 11 Tuesday, September 13, 2016 10:30 AM
