5
RQT0A75
Using the remote control
Insert the battery so the terminals (
i
and
j
) match
those in the remote control.
Point it at the remote control signal sensor on this unit.
≥
To avoid interference, please do not put any objects in front
of signal sensor.
Licenses
∫
About recorded content
Connections
Connect the AC power supply cord after all other
connections are completed.
1
Connect the antenna.
≥
Tape the antenna to a wall or column in a position with
the least amount of interference.
≥
If radio reception is poor, use an outdoor antenna
(not supplied).
2
Connect the AC power supply cord.
This unit consumes a small amount of AC power
(
l
19) even when turned off.
≥
In the interest of energy conservation, if you will not be using
this unit for an extended period of time, unplug it from the
power socket.
≥
Some settings will be lost after you disconnect the system.
You have to set them again.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective
owners.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Please note that even if content is not recorded
correctly due to any defects, Panasonic will not be
responsible for compensation for such content, losses
arising out of the recorded content, or any direct or
indirect damage caused by such recording. The same
also applies to repairing this unit.
R6/LR6, AA
(Alkaline or manganese
battery)
1
2
Adhesive tape (not supplied)
To household
AC outlet
AC power supply cord (supplied)
SC-RS50_PC_RQT0A75-C.book 5 ページ ２０１６年２月２３日 火曜日 午前９時５４分
