GETTING ST
AR
TED
ENGLISH
8
RQT8043
RQTX01
1
1
Placement of speakers (continued)
Note
•
You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player,
a microphone (except
For Continental Europe
), noise from FM
broadcasts, or continuous signals from an oscillator, test disc,
or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular coloring occurs on your television
The front and center speakers are designed to be used
close to a television, but the picture may be affected with
some televisions and setup combinations.
If this occurs, turn the television off for about 30
minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from
the television.
Assembling the front speakers
Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
• For assembly, use a Phillips-head screwdriver.
• For optional wall mount, refer to page 9.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
(with cover plate)
2 Stands (with cable)
2 Bases
8 Screws
Q
W
E
Tighten securely.
R
T
Slide into the groove.
1
Q
Position the
cable between
the ridges.
W
E
Cover plate
Remove using a fl at
object.
•
Keep for wall-mount
use
(
\
page 9).
T
Insert the wire fully.
+:
White
−:
Blue
Y
Press into the groove.
Push!
R
Tighten securely.
2
■
Preventing the speakers from falling
• You will need to obtain the appropriate screw eyes to
match the walls or pillars to which they are going to be
fastened.
• Consult a qualifi ed housing contractor concerning the
appropriate procedure when attaching to a concrete
wall or a surface that may not have strong enough
support. Improper attachment may result in damage to
the wall or speakers.
String
(not included)
Thread from the wall to the
speaker and tie tightly.
Rear of the speaker
Screw eye
(not included)
Wall
Approx.
150 mm
2
1
RQTX0111-1B_14.indd 8
RQTX0111-1B_14.indd 8
3/19/08 10:23:46 AM
3/19/08 10:23:46 AM
