RQTV0271
4
4
ENGLISH
Simple setup
Making the connections
Making the connections
Connect the AC mains lead only after all the other connections have been made.
Conserving power
The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.7 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket. You will need to reset some memory items after plugging in the unit.
To household
mains socket
Connect the AC mains lead.
The included AC mains lead is for use with this unit only. Do
not use it with other equipment. Also, do not use cords for
other equipment with the main unit.
Insertion of connector
Connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing. However there is no
problem using the unit.
Appliance inlet
Tape the antenna to a wall or column, in a position
with least amount of interference.
Connect the FM indoor antenna.
Adhesive
tape
FM indoor
antenna
Connect the AM loop antenna.
Stand the antenna up on its base. Keep the loose antenna
cord away from other wires and cords.
AM loop antenna
Connect the speaker cables.
Incorrect connection can damage the unit.
Copper (
ª
)
Silver (
·
)
Red (
ª
)
Black (
·
)
Red (
ª
)
Black (
·
)
Please refer to “Connecting the Universal Dock for iPod” and
“Connecting and playing a Bluetooth device” on page 14.
PMX3_E_EN.indd 4
PMX3_E_EN.indd 4
6/17/08 10:14:44 AM
6/17/08 10:14:44 AM
