background image

RQTV0271

10

10

ENGLISH

Using sound effects

1

Press [CLOCK/TIMER] repeatedly to select your desired 
timer.

Original display

CLOCK

˚

 

PLAY

˚

 REC

2

Within 10 seconds, press [

4

/ ] or [

¢

/ ] to set the 

starting time.

Play timer indicator

Record timer indicator

Start time

3

Press [CLOCK/TIMER] to confirm.

4

Repeat steps 2 and 3 to set the finishing time.

Finish time

To activate the timer

5

Press [

˚

PLAY/REC] to turn on your desired timer.

no display (off)

˚

 

PLAY

˚

 REC

6

Press [

y

/l

] to turn off the unit.

The unit must be off for the timer to operate.

To

Action

Change the settings

Repeat steps 1 to 4 and 6.

Change the source 
or volume

1) Press [

˚

PLAY/REC] to clear the timer 

indicator from the display.

2) Make changes to the source or volume.
3) Perform steps 5 and 6. 

Check the settings
(when the unit is on 
or in standby mode)

Press [CLOCK/TIMER] repeatedly to select 

˚

PLAY or 

˚

REC.

Cancel Press 

[

˚

PLAY/REC] to clear the timer 

indicator from the display.

Note

•  The play timer and record timer cannot be used together.
•  The record timer will start 30 seconds before the set time, with the 

volume muted.

•  The play timer will start at the preset time, with the volume 

increasing gradually to the preset level.

•  The timer comes on at the set time every day if the timer is on.
•  The unit must be in the standby mode for the timer to function.
•  If you turn the unit off and on again while a timer is functioning, 

the fi nish time setting will not be activated.

•  If MUSIC PORT or OPTION port is selected as the source when 

the timer comes on, the system turns on and engages MUSIC 
PORT or OPTION port as the source. If you wish to playback 
from the other equipments, activate the equipments’ play mode 
and increase the volume. (See the other equipments’ instruction 
manual.)

Using the timer (continued)

Selecting sound effects

Selecting sound effects

You can change the sound effect by selecting Preset EQ or 
adjusting the bass or treble effect.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

Setting

Effect

HEAVY

Adds punch to rock

CLEAR

Clarifi es higher frequencies

SOFT

For background music

VOCAL

Adds gloss to vocal

EQ-OFF

No effect

Bass or treble

Enables you to enjoy the lower or higher pitch sound.

1

Press [BASS/TREBLE] to select your desired setting.

Setting

Effect

BASS

For lower pitch sound

TREBLE

For higher pitch sound

2

Press [

5

/

, ALBUM] to adjust the level.

OR

To adjust bass or treble using the main unit.

Turn [BASS] or [TREBLE] to adjust the level.

Note

The tone level can be varied within -4 to +4.

Enjoying surround sound

Enjoying surround sound

Enables you to add natural width and depth to the stereo sound.

To activate
Press [SURROUND] to display “ 

 ” indicator.

To cancel
Press [SURROUND] again to clear “ 

 ” indicator.

Note

•  Surround sound is less discernible when listening through 

headphones.

•  If interference in FM stereo reception increases, cancel the 

surround sound effect.

Enjoying the bass

Enjoying the bass
D.Bass (Dynamic bass)

D.Bass (Dynamic bass)

Enables you to enjoy the powerful bass effect.

Press [D.BASS] to select either “ON D.BASS” or “OFF D.BASS”.

Note

The actual effect depends on the disc.

Changing the sound quality : 

Changing the sound quality : 
RE-MASTER

RE-MASTER

This feature reproduces the frequencies lost during recording to 
give you a sound closer to the original.

Press [RE-MASTER] to select either “ON RE-MASTER” or 
“OFF RE-MASTER”.

Note

•  This function is not applicable during recording process for 

CD(MP3).

•  During CD(MP3) or USB selection, the re-master effect is digital.
•  As for other selection, the re-master effect is analog.

PMX3_E_EN.indd   10

PMX3_E_EN.indd   10

6/17/08   10:15:13 AM

6/17/08   10:15:13 AM

Summary of Contents for SC-PMX3



















Reviews: