6
TQ
BM
087
3
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A
Standby/on switch [
`
], [
1
]
Press to turn the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
B
Select the audio source
On the main unit:
Press [SELECTOR] repeatedly to select the source:
To start Bluetooth
®
pairing, press and hold
[–
PAIRING].
C
Basic playback control
D
View the setup menu
E
View the content information
F
Select or confirm the option
G
Open or close the disc tray
H
Decrease the brightness of the display panel
To cancel, press the button again.
I
Adjust the volume level
J
Mute the sound
To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume
or when you turn off the system.
K
View the play menu
L
Select the sound effects
M
Disc tray
N
Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 10° up and 30° down,
30° left and right
O
Display panel
P
Headphones jack ( )
Plug type: Ø 3.5 mm (⅛
"
) stereo (not supplied)
– Excessive sound pressure from earphones and
headphones can cause hearing loss.
– Listening at full volume for long periods may
damage the user’s ears.
Q
USB port (DC 5 V 500 mA)
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
Rear
(not supplied)
PM700PP_TQBM0873_en.fm Page 6 Friday, March 17, 2023 4:34 PM
