13
TQ
BM0933
D:\A_Job\PSG\_FY22\SC-PM270\Source\woi\PM272EB.EG_TQBM0933_EN.fm
█
Connecting a device
Preparation
If this system is connected to a Bluetooth
®
device, disconnect it (
~
1
Press [
].
“BLUETOOTH READY” is shown.
2
Select “SC-PM272” or “SC-PM270” from the Bluetooth
®
menu of the device.
The name of the connected device is shown for a few seconds.
3
Start playback on the device.
Note:
• A device must be paired to connect.
• This system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this system will automatically try to connect to the last
connected device. (“LINKING” is shown during this process.)
█
Disconnecting a device
While a Bluetooth
®
device is connected
1
Press [PLAY MENU] repeatedly to select “DISCONNECT?”.
2
Press [
R
,
T
] to select “OK? YES” and then press [OK].
“BLUETOOTH READY” is shown.
To cancel, select “OK? NO”.
Using the main unit
Press and hold [–
PAIRING] until “PAIRING” is shown.
Note:
A device is disconnected when you:
– Select a different source.
– Move the device out of the maximum range.
– Disable the Bluetooth
®
transmission of the device.
– Switch off the system or the device.
PM272EB.EG_TQBM0933_EN.fm Page 13 Wednesday, August 30, 2023 4:20 PM
