RQ
T
8
6
5
4
5
Simple
Se
tu
p
∫
[HT545W]
Avoiding interference
To avoid possible interference, do not place the wireless system near any of the following devices.
The wireless system uses the same radio frequencies as other devices that may be present in your home.
The wireless system will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the
wireless link indicator (
“
[W]
”
) flashes on the main unit, and there is a brief interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best possible performance of your Home Theater System.
If the interference persists, try moving the other devices to another location outside the range of the wireless system.
∫
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should
be capable of supporting over 10 k
g
per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
∫
Fitting speaker stands
(not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
.
≥
The stands must be stable even if the speakers are in a high position.
2.4GHz-band microwave oven
2.4GHz-band cordless phone
personal computer with
2.4GHz-band wireless LAN
Speaker installation options
‰
7.5 to 9.5 mm
5.0 to 7.0 mm
Wall or pillar
‰
4.0 mm
[HT545]
Front speaker
[HT545]
Center speaker
200 mm
[HT545W]
Center speaker
[HT545]
Surround speaker
[HT545W]
Front and surround
speakers
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw
is in this position.
e.g.
Speaker stand
(not included)
Plate thickness plus
7 mm to 10 mm
e.g.
[HT545]
Center speaker
5 mm, pitch 0.8 mm
Metal screw holes
For attaching to
speaker stands
60 mm
P
o
siti
oning
the
spe
ake
rs
HT545 545W En.book Page 5 Friday, March 31, 2006 3:00 PM
