RQTX1083
20
External unit
(continued)
Compatible devices
The USB connectivity enables you to connect and play MP3
tracks from USB mass storage class.
Preparation:
Before connecting any USB mass storage device to the unit,
ensure that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The
device connected via the cable will not be recognised by this
unit.
Open the USB cover.
Reduce the volume and connect the USB mass storage
device.
•
•
To remove the USB mass storage device, select a source
other than “USB”.
Removing the USB mass storage device with it selected as a
source can damage the data stored in the device.
•
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer
USB devices that support USB 2.0 full speed
•
•
For other operating functions, they are similar as those
described in “Disc operations” (
➡
page 9, 10, 11).
Notes on USB
Supported format: Files with extension “.mp3” or “.MP3”
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported [Only
FAT 12/16/32 (File Allocation Table 12/16/32) file system
is supported].
Depending on the sector size, some files may not work.
This unit can access up to 255 albums and 2500 tracks.
The maximum number of tracks in a folder is 999 tracks.
Only one memory card will be selected when connecting
a multiport USB card reader, typically the first memory
card inserted.
Disconnect the USB card reader from the unit when you
remove the memory card. Failure to do so may cause
malfunction to the device.
When you connect the digital audio player to the
USB port, it charges all the time when the unit is on.
•
•
•
•
•
•
•
•
•
USB operations
Stop
Press
[
g
, ]
. “RESUME” is displayed.
The position is memorised.
Press
[USB
q
/
h
]
to resume play.
Press
[
g
, ]
again to clear the position.
Pause
Press
[USB
q
/
h
]
. Press again to resume
play.
Skip track
Press
[
u
]
or
[
i
]
.
Skip album
Press
[
e
,
r
]
.
Direct access
play (Play starts
with the track you
select.)
Press
[
e
,
r
]
to select the album.
Press
[
i
]
once and then the numeric
buttons to select the track.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Panasonic
Corporation is under license. Other trademarks and trade
names are those of their respective owners.
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation”, declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing
Europe GmbH, Panasonic Testing Centre, Winsbergring 15,
22525 Hamburg, Germany
This product is intended to be used in the following countries.
GB, IE
This product is intended for general consumer. (Category 3)
or
“Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has
been certified by the developer to meet Apple performance
standards.
“Works with iPhone” means that an electronic accessory has
been designed to connect specifically to iPhone and has
been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries. iPhone is a trademark of Apple Inc.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson.
OPERATING AT 2400 MHz TO 2483.5 MHz
USB mass storage device (not included)
Press [USB
q
/
h
] to start play.
