11
RQT9882
EN
G
L
ISH
Listening to the radio
You can preset up to 30 channels.
Preparation
≥
Make sure that the FM antenna is connected.
(
l
p. 6)
≥
Turn the unit on.
≥
Press [RADIO/AUX] to select “FM”.
≥
A station previously stored is overwritten when another
station is stored in the same channel preset.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [
3
,
4
] to select “LOWEST” or
“CURRENT” and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.9 or FM 87.5).
CURRENT:
To begin auto preset with the current
frequency.*
{.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
* To change the frequency, refer to “Manual tuning and
presetting”.
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2
Press [
3
,
4
] to select “PRESET” and then
press [OK].
3
Press [
:
/
6
] or [
5
/
9
] to select the
channel.
∫
Manual tuning and presetting
Select a radio broadcast.
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2
Press [
3
,
4
] to select “MANUAL” and then
press [OK].
3
Press [
:
/
6
] or [
5
/
9
] to tune to the
required station.
≥
To start automatic tuning, press and hold
[
:
/
6
] or [
5
/
9
] until the frequency starts
scrolling. Tuning stops when a station is found.
To preset the channel
4
While listening to the radio broadcast, press
[OK].
5
Press [
3
,
4
] to select the channel and then
press [OK].
∫
To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM
MODE”.
2
Press [
3
,
4
] to select “MONO” and then press
[OK].
≥
This setting can be preset and memorized. To do
so, continue to step 4 of “Manual tuning and
presetting”.
≥
Select “STEREO” in step 2 to return to stereo
broadcasts.
≥
“MONO” is canceled if the frequency is changed.
∫
To display the current signal status
Press [DISPLAY].
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
Presetting stations automatically
Listening to a preset channel
“FM ST”:
The FM signal is tuned and in stereo.
“FM”:
There is no tuned signal or the FM
signal is in monaural.
“FM MONO”: “MONO” is selected in step 2 of “To
improve FM sound quality” (
l
above).
SC-HC39_PPC~RQT9882_mst.book 11 ページ ２０１４年１月３１日 金曜日 午後７時４５分
