Confidential
Until:
02 Dec 2019
5
T
Q
BJ
220
5
5
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A
Standby/on switch [
`
], [
1
]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
B
Select the audio source
On the remote control:
Press the corresponding button to select the source.
[ ]: BLUETOOTH
[USB/CD]: CD
USB
[RADIO]: DAB+
FM
On the main unit:
Select “BLUETOOTH” as the audio source
To start Bluetooth
®
pairing or disconnect a Bluetooth
device, press and hold the corresponding button.
C
Basic playback control
D
View the setup menu
E
View the content information
F
Select or confirm the option
G
Open or close the sliding door
H
Decrease the brightness of the display panel
To cancel, press the button again.
I
Adjust the volume level
J
Mute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
K
View the play menu
L
Select the sound effects
M
USB port (
)
N
Sliding door
O
Display panel
P
Remote control sensor
Point the remote control at the remote control
sensor, away from obstacles and within the
operation range.
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
Top view
ENGLISH
HC212EG_TQBJ2205_En.Sw.Da.Fi.Po.Cz.book Page 5 Tuesday, November 12, 2019 2:39 PM
offset printing
