10
RQT7035
Si
mple se
tu
p
(Center and surround speakers only)
[Note]
The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 k
g
per screw.
1
Screw a screw (not included) into the wall.
2
Fit the speaker securely onto the
screw with the hole.
Preparation
Ensure the stands meet these conditions before purchasing them.
≥
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
.
≥
The stands must be stable even if the speakers are in a high
position.
Notes on speaker use
≥
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
≥
Reduce the volume in the following cases to avoid damage.
–When playing distorted sound.
–When the speakers are receiving howling from a record player,
noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but the
picture may be affected with some televisions and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
Other speaker setup options
Attaching to a wall
30–35 mm
Wall
‰
7.5–9.5 mm
7–9 mm
Speaker feet
Speaker feet
Fitting speaker stands (optional)
5 mm
pitch 0.8 mm
60 mm
Attach the stands with
these holes.
Plate thickness plus 7 to 10 mm
Speaker stand
(not included)
Caution
≥
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
≥
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
