12
TQBJ2215
Listening to FM radio
You can preset up to 30 FM channels.
Channel 1 to 5 will be set under [1] to [5] on this unit.
(
l
right, “Changing the stations stored under [1] to
[5]”)
Preparation
≥
Make sure that the antenna is connected. (
l
6)
≥
Turn the unit on.
≥
Press [
O
,
N
SELECT] repeatedly to select “FM”.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [
3
,
4
] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(“FM 87.50”).
CURRENT:
To begin auto preset with the current frequency.*
1
≥
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to “Manual tuning”.
1
Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2
Press [
3
,
4
] to select “PRESET” and then press
[OK].
3
Press [
:
/
6
] or [
5
/
9
] to select the
channel.
≥
You can select channel 1 to 5 by pressing one of [1] to [5] on
this unit.
∫
Manual tuning
1
Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2
Press [
3
,
4
] to select “MANUAL” and then press
[OK].
3
Press [
:
/
6
] or [
5
/
9
] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
1
While listening to the radio broadcast
Press [OK].
2
Press [
3
,
4
] to select the channel and then press
[OK].
≥
Do steps 1 through 2 again to preset more stations.
≥
A station previously stored is overwritten when another
station is stored in the same channel preset.
(On this unit)
You can change the stations stored under [1] to [5]
easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until “P
” appears on
the display.
(“
” stands for a number.)
≥
When you change the stations stored under [1] to [5],
channel 1 to 5 are also changed to the same corresponding
stations.
∫
To display the current FM signal status
Press [DISPLAY] repeatedly to select “FM STATUS”.
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
∫
To display Radio Data System text data
This system can show the text data transmitted by the
Radio Data System available in some areas.
Press [DISPLAY] repeatedly.
≥
Radio Data System is available only when stereo works in
reception.
≥
Radio Data System may not be available if reception is poor.
Presetting stations automatically
Listening to a preset channel
Presetting stations manually
Changing the stations stored under
[1] to [5]
“FM ST”:
FM stereo broadcast is being received.
“FM - - - -”:
No broadcast is received or FM
broadcast received is weak or in
monaural.
“FM MONO”: You have set the “FM MODE” to
“MONO”. (
l
17, “If noise is excessive
during FM reception.”)
“PS”:
Programme service
“PTY”:
Programme type
“FREQ”: Frequency
SC-DM502E-TQBJ2215_eng_pol_cze.book 12 ページ ２０２０年１月１１日 土曜日 午前９時３２分
