8
RQT0A53 (ENG)
Connecting a USB device
Preparation
≥
Before you connect a USB device to the unit,
make sure you do a backup of the data.
1
Decrease the volume and connect the USB
device to the USB port.
2
Press [USB] to select “USB A” or “USB B”.
The corresponding USB status indicator lights
green when selected.
≥
Insert the USB device directly. Do not use any USB
extension cable.
≥
Please disconnect the USB device if you finish using.
≥
Stop the USB operation before disconnecting the USB
device.
Bluetooth
®
operations
You can listen to the sound from the Bluetooth
®
audio device from this unit wirelessly.
≥
Refer to the operating instructions of the
Bluetooth
®
device for details.
Preparation
≥
Turn on the Bluetooth
®
feature of the device and
place the device near this unit.
∫
Pairing with Bluetooth
®
devices
1
Press [ ] to select “BLUETOOTH”.
{.
If “PAIRING” is indicated on the display, go to step 4.
To enter pairing mode
§
2
Press [PLAY MENU] to select “PAIRING”.
3
Press [
3
,
4
] to select “OK? YES” and then
press [OK].
To pair with a device
4
Select “SC-CMAX5” from the Bluetooth
®
device’s Bluetooth
®
menu.
{.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may be
displayed before “SC-CMAX5” is displayed.
{.
The name of the connected device is indicated on the
display for a few seconds.
5
Start playback on the Bluetooth
®
device.
§
You can also enter pairing mode by pressing and holding
[
-PAIRING] on the unit.
∫
Connecting a paired Bluetooth
®
device
1
Press [ ] to select “BLUETOOTH”.
{.
“BLUETOOTH READY” is indicated on the display.
2
Select “SC-CMAX5” from the Bluetooth
®
device’s Bluetooth
®
menu.
{.
The name of the connected device is indicated on the
display for a few seconds.
3
Start playback on the Bluetooth
®
device.
≥
If prompted for the passkey, input “0000”.
≥
You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used the longest will
be replaced.
≥
This unit can only be connected to one device at a time.
≥
When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
≥
When enjoying video contents with this function, the video
and audio output may not be synchronized.
USB device
(not supplied)
This unit (top)
Connecting via Bluetooth
®
menu
SC-CMAX5_PP~RQT0A53-Y_ENG.book 8 ページ ２０１５年６月１２日 金曜日 午前１０時２３分
