![background image](http://html1.mh-extra.com/html/panasonic/sc-cmax5/sc-cmax5_owners-manual_4107920015.webp)
15
(ENG) RQT0A53
Others
This function automatically switches off the system
when you do not use it for approximately
20 minutes.
1
Press [SETUP] repeatedly to select “AUTO
OFF”.
2
Press [
3
,
4
] to select “ON” and then press
[OK].
≥
To turn the function off, select “OFF” in step 2.
≥
When connected to a Bluetooth
®
device, the function does
not work.
When “SC-CMAX5” is selected from a paired
Bluetooth
®
device’s Bluetooth
®
menu, this unit will
turn on automatically from standby mode and
establish a Bluetooth
®
connection.
1
Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2
Press [
3
,
4
] to select “ON” and then press
[OK].
≥
To turn the function off, select “OFF” in step 2.
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
∫
Checking the software version
The version of the installed software is displayed.
Press [SETUP] repeatedly to select “SW VER.” and
then press [OK].
≥
Press [OK] to exit.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
Preparation
Press [AUX] to select “AUX 1” or “AUX 2”.
∫
To set the code to “REMOTE 2”
1
While pressing and holding [USB] on the unit,
press and hold [AUX] on the remote control
until the unit’s display shows “REMOTE 2”.
2
Press and hold [OK] and [USB] on the remote
control for at least 4 seconds.
∫
To set the code to “REMOTE 1”
1
While pressing and holding [USB] on the unit,
press and hold [USB] on the remote control
until the unit’s display shows “REMOTE 1”.
2
Press and hold [OK] and [ ] on the remote
control for at least 4 seconds.
Auto off function
Bluetooth
®
standby
Software update
Remote control code
SC-CMAX5_PP~RQT0A53-Y_ENG.book 15 ページ 2015年6月12日 金曜日 午前10時23分